People are now becoming increasingly aware of the aesthetic sense in their surroundings. Therefore, they are very fond of aesthetic design. This has made people move towards designing their bathrooms as well.
Bathroom installation, such as bathroom towel racks, is very important because the right installation of a towel rack that fits a bathroom perfectly may still be considered an awkward and useless thing in another bathroom and also enhance the overall design of the bathroom.
This guide helps you how to install a towel rack for your bathroom layout without any hesitation or damage.
Types of Towel Racks and Their Uses
Towel racks, as per the requirements of a family, can be classified into different types. These racks, according to their look and design, make the bathroom more aesthetic.
1. Towel Bar
It is used for hanging towels and hand towels. It is generally suitable for small-sized bathrooms.
2. Double Towel Bar
Generally, it consists of two rods. It is suitable for use in family bathrooms. In this type, towels and other necessary bathroom equipment can be hung on the rods.
3. Towel Ring
It is generally installed near the wash basin for hand towels. In this type, circular-shaped towel rings are used, which help enhance the beauty of the bathroom.
Tools and Materials Required
Tools Required for the installation of a towel rack, the following tools are required:
(i) Drill machine
(ii) Screws
(iii) Measuring tape
(iv) Pencil
(v) Wall plug
(vi) Spirit level
The bathroom towel rack should be installed as per the recommended design.
Choosing the Right Location for a Towel Rack
Procedure for Towel Rack Installation
For towel rack installation, first choose the right place that is easy to reach for taking the towel.
Next, measure the distance from the shower area so that it is easy to take the towel after having a shower.
Make sure the towel rack installation region does not have any electric bulbs, switches, or plug points nearby to prevent any type of risk.
Measuring and Marking the Installation Area
First, take a measuring tape and measure the distance from the shower area.
Then, measure the height at which the towel rack should be installed so that it is easy for the user to take the towel.
The height should be selected in such a way that water does not reach that area.
Also Read: How to Choose the Right Towel Rack for Your Bathroom Layout
Step-by-Step Towel Rack Installation Process
Step-by-Step Method for Installation of Bathroom Towel Racks
Step 1:- Take a proper view of the bathroom and, according to the position of the shower, choose the right location for the towel rack.
Step 2: Then, mark the points using a measuring tape and pencil.
Step 3:- Drill the marked points and insert wall plugs.
Step 4:- Fix the mounting brackets and then install the towel rack rod.
Step 5:- After installation, check the rod and ensure its stability so that it does not fall.
Installing a Towel Rack on Different Wall Types
It is necessary to understand the type of wall on which the towel rack needs to be installed.
Walls are of different types:
- Concrete
- Drywall
- Glass
- Wood
- Tiles
As per the wall type, the selection of tools and fittings differs.
Through this, proper installation can be done while maintaining the safety and durability of the towel rack, without causing any damage. Caution: Never drill on the edge of tiles.
Common Mistakes to Avoid During Installation
Common Mistakes Commonly Found During Towel Rack Installation (Which Should Be Avoided)
1. Not taking proper measurements of the height.
2. Not measuring the correct placement distance, due to which the drill holes not made at the correct position.
3. Not properly tightening the screws, due to which the towel rack is not installed properly.
4. Using tools that are not suitable for the type of wall
5. Placing racks very close to water sources
6. Mixing too many finishes.
By steering clear of these mistakes, you can ensure that your towel rack for bathroom use will be in good working order for a long lifespan.
Safety Tips While Installing a Towel Rack
For installing the towel rack, it is necessary to check safety precautions so that no damage or risk occurs after installation.
1. Check the wall type and choose the appropriate tools according to the wall material.
2. Make sure the electrical supply is turned off, and ensure that you do not drill near switchboards or pipelines.
3. Drill into the tiles properly and keep the drilling speed slow so that the tiles do not crack.
4. Do not use the towel rack to hang heavy or wet clothes or buckets.
5. Make sure the towel rack is installed securely and tightly so that it does not fall accidentally
Final Inspection and Usage Tips
After installing the towel rack, make sure it is securely and tightly fixed to the wall. Check it thoroughly using proper load testing.
- For long-term use, ensure that the installation is strong and stable.
- Do not hang heavy or frequently wet clothes or buckets on the towel rack to avoid overloading.
- Keep the towel rack clean by wiping it regularly with a soft cloth to maintain its appearance and durability.
- For less corrosion, ensure proper ventilation in the bathroom to reduce moisture buildup.
- Keep checking the screw tightness regularly. If it becomes loose, tighten it properly to prevent falling or damage.
Conclusion
Choosing the right towel racks for the installation of a towel rack in a bathroom, to make it more aesthetic, it is necessary to check various aspects, such as security, safety, and the type of wall on which the rack needs to be installed. The design of the towel rack is also an important aspect to consider, and a properly selected towel rack or towel shelf is a hygienic solution, a way to keep towels dry, and a great addition to the bathroom’s interior design.
And these all aspects can be found in the Cardin bath, where you can get different designs of towel racks and other bathroom accessories, and Cardin towel racks also give you a guarantee for a long lifespan and everyday ease of use.
